Produits

ABRASION RESISTANT BELTS

DEPREUX proposes three types of textile conveyor belts for the transport of bulk or other material :

The DELTA is a conventional ply-belt, made up of textile layers bound together by a thin layer of rubber and two rubbers covers.
The DYNA is a solid-woven belt with rubber covers. Its main characteristics are high life expectancy and high resistance to impacts and potential incidents.
The DYNA-P is a variation of a DYNA, using PVC covers instead of rubber. It is used in very special cases such as the transport of metallic parts.

Each belt is made to fit in as closely as possible with the nature of the material to be transported, the conveyor system parameters and the targeted belt life expectancy.

The choice of the type of the belt cover is largely influenced by the physical and chemical properties of the material to be transported: its granularity, its level of humidity, its abrasion or cutting capacities.

Here are some examples of different types of material :

highly abrasive material: clinker, iron ore, pyrite, metallurgic coke, metallurgic lignite, magnetite, quartz, lignite, superphosphate, glass powder.
moderately abrasive material: anthracite, coal, ash, bauxite, potash, gravel, aluminium, concrete, sand.
heavy or sharp material: to transport this kind of material, you need a belt with a very sturdy structure. This is the case in, for example: iron, andesite, schist, ryolythe, comblanchien, and all types of rock with a granularity of higher than 100 mm after being broken down.